Dell LCD TV W3706C - Manual (Page 26)

26 Using Your Remote Control
www
.de
ll
.co
m |
sup
por
t.d
e
ll
.c
om
Using Your TV With a Universal or Learning Remote Control
Preprogrammed universal remote controls can be programmed to control the following
functions on your Dell TV:
• Power
• Channel Up (+)
• Channel Down (-)
• Volume Up (+)
• Volume Down (-)
• Mute
• Input Select
NOTE: Future preprogrammed universal remote controls may be able to control more functions.
You can program universal remote controls to work with your Dell TV in the following ways:
• If the remote control manual lists codes by manufacturer, use the Philips codes.
• If the remote control has a search function, this function may be used to find the
correct code.
• If the remote control has a learning function, you can program specific buttons on it from
the Dell remote control, in addition to those buttons listed above.
NOTE: For additional information, see the documentation that came with your universal or learning
remote control.
23 Vol + Increases the volume
24 ENTER Press to confirm the channel frequency entry
25 POS Press to change the position of the PIP, POP, or PBP window
26 SWAP Swaps images when using PIP, or PBP
27 PIP Enters and exits PIP mode
28 EXPAND Cycles through three enlargement modes:
• Top half of page in larger letters.
• Bottom half of page larger letters.
•
Regular viewing
29 TEXT Cycles through three Teletext modes:
• On
• Mix (Teletext and program simultaneously)
•
Off
W3202 3706MC_EMEA_e0.book Page 26 Sunday, October 2, 2005 6:06 PM