Dell S520 Projector - Manual (Page 7)

7
13. Mount screen onto wall bracket by hooking into
the back groove of the screen frame (Figure 6).
14. Secure bottom of screen to wall using (3) of
the supplied #8 x 1/2” screws through bottom
brackets into the lower channel of the screen
frame (Figure 7).
15. Secure marker tray to right side of screen frame
at desired height by using (2) of the supplied
#8 x 1/2” screws into the side channel of the
screen frame (Figure 8).
16. Secure IR sensor bar (packaged with the S520
Projector) to screen by sliding it onto the metal
bracket. Insert safety screw through IR sensor
bar into bracket (Figure 9).
Figure 6
Figure 8
Figure 7
Figure 9
Attach marker
tray to frame with
(2) screws into the
side channel.
Installation (continued)
Safety
Screw