Dell Inspiron Zino (300, Late 2009) - Manual (Page 45)

43
Using Support Tools
If you are experiencing memory issues, c.
press <y> otherwise press <n>.
The following message is displayed
“Booting Dell Diagnostic
Utility Partition. Press any
key to continue.”
Press any key to go to the
d. Choose An
Option window.
If PSA is not invoked:
Press any key to start the Dell Diagnostics
from the diagnostics utility partition on your
hard drive and to go to the Choose An Option
window.
Select the test you want to run. 4.
If a problem is encountered during a test, 5.
a message appears with an error code and
a description of the problem. Write down
the error code and problem description
and contact Dell (see “Contacting Dell”
on page 59).
NOTE: The Service Tag for your computer
is located at the top of each test screen.
The Service Tag helps you identify your
computer when you contact Dell.
When the tests are complete, close the test 6.
screen to return to the Choose An Option
window.
To exit the Dell Diagnostics and restart the
7.
computer, click Exit.
Starting Dell Diagnostics From the
Drivers and Utilities Disc
Insert the 1. Drivers and Utilities disc.
Shut down and restart the computer. 2.
When the DELL logo appears, press <F12>
immediately.
NOTE: If you wait too long and the
operating system logo appears, continue to
wait until you see the Microsoft ® Windows ®
desktop; then, shut down your computer
and try again.