Dell Latitude E5420 (Early 2011) - Manual (Page 78)

Related Links
Installing the Display Assembly
Installing the Display Assembly
1. Attach the display assembly to the base of the computer.
2. Tighten the screws to secure the display assembly.
3. Connect the low-voltage differential (LVDS) cable to the system board.
4. Connect the camera cable to the system board connector.
5. Push the antenna cables through the opening of the bottom of the computer.
6. Secure the antenna cables to the routing channels.
7. Connect the antenna cables to the WLAN/WLAN cards.
8. Replace the palm rest.
9. Replace the CPU door .
10. Replace the keyboard .
11. Replace the keyboard trim .
78