Dell PowerVault 122T DLT VS80 (Autoloader) - Manual (Page 38)

Back to Contents Page
Technical Specifications: Dell™ PowerVault™ 122T DLT VS80 Autoloader User's
Guide
Physical Specifications
Autoloader Specifications
Autoloader Environmental Specifications
Tape Drive Specifications
Physical Specifications
Autoloader Specifications
Autoloader Environmental Specifications
Tape Drive Specifications
DLT VS80 Drive Specifications
Characteristic Product Alone Packaged
Height 8.4 cm (3.34 in) 20.5 cm (8.0 in)
Width 41.9 cm (16.5 in) 60 cm (23.6 in)
Depth 60.9 cm (24 in) (Approximately 65 cm (25.6 in) with Bar Code Reader) 74.3 cm (29.2 in)
Weight 10 kg (22 lb) 11.35 kg (24.9 lb)
Characteristic Specification
Maximum storage capacity Native: 320 GB
Compressed: 640 GB (assuming 2:1 compression ratio)
Maximum data transfer rate Native: 3 MB/s
Compressed: 6 MB/s (assuming 2:1 compression ratio)
Drive type 1 DLT VS80 drive
Number of slots 8
MSBF 250,000 hours
Interface LVD ultra wide SCSI-2, 16 bits wide, 68-pin HD connector
Characteristic Specification
Temperature/humidity
Operating 10º to 40ºC (Web bulb temp, 32ºC max)
Non-operating – 40º to 65ºC (Web bulb temp, 40ºC max)
Recommended operating temperature 20º to 30ºC (Web bulb temp, 30ºC max)
Temperature shock immunity - maximum rate of change 10ºC per hour
Humidity
Operating 20% to 80% RH non-condensing
Non-operating 10% to 95% RH non-condensing
Altitude
Operating 0 to 4000 m
Non-operating 0 to 9144 m
Vibration (5–500 Hz)
Maximum acceleration to operating 0.25g RMS (random)
Frequency range 500 Hz
Description DLT1 (VS80)
Read/write transfer rate: maximum sustained (DLTtape™IV media) Non-compressed mode: 3.0 MB/s
Compressed (2:1 typical): 6.0 MB/s
Burst transfer rate 20 MB/s
Average access time 68 seconds
Loading time to BOT
(for previously written tape) 59 seconds (average)
Unloading time from BOT 17 seconds (average)
MTBF >200,000 hours
Interface type Low-Voltage Differential (LVD) Ultra 2 SCSI