CREATIVE Sound Blaster Audigy 2 - Manual (Page 19)

Installing Hardware 1-6
Installation Steps
Step 1: Prepare your
computer
1. Turn off your computer and all peripheral devices.
2. Touch a metal plate on your computer to ground yourself and to discharge any static electricity, and
then unplug the power cord from the wall outlet.
3. Remove the computer cover.
4. Remove the metal brackets from two adjacent unused PCI slots as shown in Figure 1-3. Put the screws
aside for use later. Turn off the main power supply
and disconnect your computer’s
power cord. Systems using an
ATX power supply unit with soft
power off may still be powering
the PCI slot. This can damage
your audio card when it is
inserted into the slot.
Remove any existing audio card or
disable the onboard audio chipset.
For more information, see
“Problems with Multiple Audio
Devices” on page B-9.
Figure 1-3: Removing metal plates
A: metal bracket
B: PCI slot
C: ISA slot (may not
be present on
your computer)
A
B
C