CREATIVE Sound Blaster Audigy 2 - Manual (Page 20)

Installing Hardware 1-7
Step 2: Install the
Sound Blaster
Audigy 2 card
1. Align the Sound Blaster Audigy 2 card with the PCI slot and press the card gently but firmly into the
slot as shown in Figure 1-4.
2. Secure the card with one of the screws you had placed aside earlier.
Do not force the audio card into
the slot. Make sure that the gold
finger PCI connector on the
Sound Blaster Audigy 2 card is
aligned with the PCI bus
connector on the motherboard
before you insert the card into
the PCI expansion slot.
If it does not fit properly, gently
remove it and try again
.
Figure 1-4: Securing the audio card to the expansion slot.
2
1