Dell PowerVault MD3000i User Manual
Page 32
Advertising
Dell MD Storage Array vCenter Plug-in | 32
NOTE: To detect the SAS HBA addresses, the LSI SAS SMI-S provider must be upgraded to the version
included with the install and as described in section
Installing the SAS Provider Upgrade
. When the
provider is not upgraded, the list of address does not appear and the icon above the servers will be red.
Figure 29. Commit Changes
The ESX host has now been configured to the storage array. The next step is to create new virtual disks on the
storage array to be used by the ESX host. New virtual disks are created using the vCenter Plug-in.
Advertising