Dell Inspiron Desktop (3847, Early 2013) - Manual (Page 36)

36 | Replacing the Front I/O Panel
Replacing the Front I/O Panel
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 7. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1 Align and slide the front I/O panel clamps into the front I/O panel clamp slot.
2 Replace the screw that secures the front I/O panel to the front panel.
3 Connect the front I/O panel cables to the system board connectors (AUDF1, USBF1,
and USBF3). See "System-Board Components" on page 11.
Postrequisites
1 Replace the front bezel. See "Replacing the Front Bezel" on page 20.
2 Replace the computer cover. See "Replacing the Computer Cover" on page 13.
book.book Page 36 Tuesday, November 12, 2013 1:54 PM