Dell M409WX Projector - Manual (Page 21)

Using Your Projector 21
Using the On-Screen Display
The projector has a multi-language On-Screen Display (OSD) that can be
displayed with or without an input source present.
In the Main menu, press
or to navigate through the tabs. Press the Enter
button on the control panel or the remote control to select a submenu.
In the submenu, press or to make a selection. When an item is selected,
the color changes to dark gray. Use or on the control panel or the remote
control to make adjustments to a setting.
To go back to Main menu, go to Back tab and press the Enter button
on the
control panel or the remote control.
To exit the OSD, go to Exit tab and press Enter button
or press Menu button
on the control panel or the remote control.
Main Menu
Input Select
A
UTO
S
OURCE
—Select On (Default) to
automatically detect the available input
signals. When On is selected and you press
Source on the control panel/remote, it
automatically finds the next available input
signal.
Select Off to lock the current input signal or
to manually select the input signal you want
to use. When Off is selected and you press
Source , you select which input signal you
want.
VGA—Press Enter to detect VGA signal.
S-V
IDEO
—Press Enter to detect S-Video signal.
19 Auto adjust Press to synchronize the projector with the input
source. Auto adjust does not operate if the OSD
is displayed.
20 Keystone adjustment Press to adjust image distortion caused by tilting
the projector. (+40/-35 degrees)