Dell POWEREDGE M1000E - Manual (Page 6)

Versions/Systems Affected
All CMC versions including CMC 5.0.
Issue 4:
Description
When you add a member chassis to a chassis group using the Multi-Chassis Management feature, you
cannot specify the group members with an IPv6 address.
Resolution
None
Versions/Systems Affected
All CMC versions including CMC 5.0.
Issue 5:
Description
While running "racadm getactiveerrors" command, module ID for server errors
is displayed as a slot number, for example 1,2,3, and so on.
Resolution
None
Versions/Systems Affected
CMC 5.0
Installation
Prerequisites
For information on pre-requisites, see the Dell PowerEdge M1000e Chassis Management Controller
Firmware Version 5.0 User's Guide.
For information on Hardware and Software requirements, see the
Dell PowerEdge M1000e Chassis
Management Controller Firmware Version 5.0 User's Guide.
For information on Installation and Configuration, see the
Dell PowerEdge M1000e Chassis Management
Controller Firmware Version 5.0 User's Guide.
Installation Instructions
For information on installation, see the Dell PowerEdge M1000e Chassis Management Controller
Firmware Version 5.0 User's Guide.
Upgrade
See the Prerequisites section for the correct version numbers.