Setup – Dell Latitude E6400 XFR (Mid 2008) User Manual

Page 10

Advertising
background image

Dell

Latitude™ E6400 XFR Setup and Features Information

Page 10

The Secure Digital card can be fully inserted, allowing the protective door to be closed. Insert the

card into the secure digital slot until it is fully seated in its connector. To release the secure digital

card, press in on the card edge and the reader will eject the card.

Reverse the procedure to close the protective door.

Setup

WARNING

:

Before working inside your computer, read the safety information that

shipped with your computer. For additional safety best practices information, see the

Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

WARNING: The AC adapter works with electrical outlets worldwide. However, power

connectors and power strips vary among countries. Using an incompatible cable or

improperly connecting the cable to the power strip or electrical outlet may cause fire

or equipment damage.

CAUTION: When you disconnect the AC adapter cable from the computer, grasp the

connector, not the cable itself, and pull firmly but gently to avoid damaging the cable.

When you wrap the AC adapter cable, ensure that you follow the angle of the

connector on the AC adapter to avoid damaging the cable.

NOTE: Some devices may not be included if you did not order them.

NOTE: It is recommended that you turn on and shut down your computer at least once before

you install any cards or connect the computer to a docking device or other external device, such

as a printer.

1. Connect the AC adapter to the AC adapter connector on the computer and to the electrical

outlet.

2. Connect the network cable.

Advertising