Dell Latitude Xpi CD - Manual (Page 5)

Installing Utilities and Drivers 5
To access the built-in PC Card utility in the Windows 95
operating system, click the Start button, point to Settings,
and then click Control Panel. Then double-click the PC
Card (PCMCIA) icon, and follow the instructions on
your screen. If you need more information, see your Win-
dows 95 documentation.
NOTES: The driver for the PCI 1131 CardBus controller
on the Dell Latitude XPi CD M166ST is compatible with
the PCI 1130 controller on the Dell Latitude XPi CD
P150ST. However, the driver for the PCI 1130 controller
is not compatible with the driver for the PCI 1131
controller.
Do not use the PCMSetup for Windows icon in the
PhoenixCard Manager program group or folder. Use the
CardAgent icon if you need to configure your PC Card
settings.
Windows 3. x
To install the PC Card Manager utility in the Windows
3.x operating system, follow these steps:
1. Save your work and close all application pro-
grams, because you will need to restart your
computer at the end of this procedure to complete
the installation.
2. Remove any PC Cards from your computer.
3. Check your config.sys file to make sure the line
containing the filename emm386.exe reads as
follows:
device=C:\dos\emm386.exe noems
If you need more information about how to edit your
config.sys file, see your MS-DOS documentation.
4. Insert Card Manager Diskette 1 into the diskette
drive.
5. In the Program Manager, select the Run option
from the File menu.
6. Type a:\install in the Run window. Then
click the OK button or press <ENTER> to install the
utility on your hard-disk drive.
7. Follow the instructions on your screen, and insert
Card Manager Diskette 2 when prompted.
8. After the PC Card Manager utility is installed,
Dell recommends that you check your config.sys
file to make sure the line containing the filename
emm386.exe reads as follows:
device=C:\dos\emm386.exe noems X=d000-
dbff
9. Restart your computer to use the utility.
If you do not plan to use a removable storage card (such
as an Advanced Technology Attachment [ATA] card),
follow these steps:
1. Locate the line that reads as follows:
devicehigh=C:\pcm401\program\
pcmata.sys
2. Add the rem command to the beginning of that
line.
After you add the rem command, the line should
read as follows:
rem devicehigh=C:\pcm401\program\
pcmata.sys
If you need more information about how to edit your
config.sys file, see your MS-DOS documentation.
I
nstalling the Audio Drivers
Dell provides audio drivers so you can customize the
sound features of your computer.
NOTE: The driver for the ESS 1887 controller on the
Dell Latitude XPi CD M166ST is compatible with the
ESS 1888 controller on the Dell Latitude XPi CD
P150ST. However, the driver for the ESS 1888 controller
is not compatible with the driver for the ESS 1887
controller.
Windows 3. x or Windows for
Workgroups 3. x
To install the audio drivers in the Windows 3.x or Win-
dows for Workgroups 3.x operating system, follow these
steps:
1. Save your work in all open application programs,
because you will need to restart your computer at
the end of this procedure to complete the
installation.