Dell PowerVault 136T LTO/SDLT (Tape Library) - Manual (Page 4)

1-2 Information Update
w
w
w
.d
e
ll
.co
m
|
s
u
p
p
o
rt
.d
e
ll.c
o
m i In the Fast!UTIL Options window, select Exit Fast!UTIL, and then press
<Enter>.
j Select Reboot System, and then press <Enter>.
Your system reboots with your updated settings.
2 Connect port A on the PowerVault 136T Fibre Channel module to the Fibre Channel
fabric and disconnect port B.
3 Use the Dell PowerVault 136T Fibre Channel Bridge Manager software to channel
zone all of the tape devices within the fabric to port A in the PowerVault 136T.
Figure 1-1 provides an example of this solution.
F i g u r e 1 - 1 . C o n n e c t i n g t h e P o w e r Va u l t 1 3 6 T t o O n e F i b r e C h a n n e l
Fa b r i c
NetWare host NetWare host
PowerVault 136T connected to a
Fibre Channel module
Fibre Channel
fabric
Fibre Channel
module port A
is connected
to the fabric
Fibre Channel module
port B is not connected
to the fabric