Dell PowerEdge 750 - Manual (Page 7)

After creating macros for the keys listed in Table B -1 , press <F1> on the client system's keyboard during terminal emulation to send the escape sequence
<Esc><O><P> to the host system. The host system then interprets the sequence as <F1>.
Additional escape sequences may be required by certain utilities or functions on the host system. Create macros for the additional sequences listed in Table B -
2 .
.
Table B-2. Additional Escape Sequences
Back to Contents Page
<Delete> <Esc><[><3><~> VT 220
<Esc><–> ANSI
<Page Up> <Esc><[><5><~> VT 220
<Esc><Shift><?> ANSI
<Page Down> <Esc><[><6><~> VT 220
<Esc></> ANSI
<Shift><Tab> <Esc><[><Z> VT 100
<Esc><[><0><Z> VT 220
<Esc><[><Shift><z> ANSI
NOTE: Escape-sequence key combinations listed in Table B -2 are case-sensitive. For example, to generate the character <A> you must press
<Shift><a>.
Key(s) Supported Sequence
<Ctrl><Alt><Del>
(Reboot host system)
<Esc><R><Esc><r><Esc><R>
<Alt><x> <Esc><X><X>
<Ctrl><H> <Esc><Ctrl><H>
<Ctrl><I> <Esc><Ctrl><I>
<Ctrl><J> <Esc><Ctrl><J>
<Ctrl><M> <Esc><Ctrl><M>
<Ctrl><2> <Esc><Ctrl><2>