Dell Latitude E4200 (Late 2008) - Manual (Page 33)

Troubleshooting Tips
33
Dell Support Utility
The Dell Support Utility provides self-support information, software updates,
and health scans of your computing environment. Access the Dell Support
Utility from the
icon on the taskbar, or from the Start menu.
If the Dell Support icon does not appear in your taskbar:
1 Click Start→ All Programs→ Dell Support→ Dell Support Settings.
2 Ensure that the Show icon on the taskbar option is checked.
NOTE:
If the Dell Support Utility is not available from the Start menu, go to
support.dell.com and download the software.
For more information about the Dell Support Utility, click the question mark
(?) at the top of the Dell
™ Support screen.
Dell Diagnostics
CAUTION:
Before working inside your computer, read the safety information that
shipped with your computer. For additional safety best practices information, see
www.dell.com/regulatory_compliance.
Starting the Dell Diagnostics From Your Hard Drive
1 Ensure that the computer is connected to a working electrical outlet.
2 Turn on (or restart) your computer.
3 When the DELL™ logo appears, press <F12> immediately. Select
Diagnostics from the start menu and press <Enter>.
NOTE:
If you wait too long and the operating system logo appears, continue to
wait until you see the Microsoft
®
Windows
®
desktop, and then shut down
your computer and try again.
NOTE:
If you see a message stating that no diagnostics utility partition has
been found, run the Dell Diagnostics from the Drivers and Utilities media.
4 Press any key to start the Dell Diagnostics from the diagnostics utility
partition on your hard drive, and follow the instructions on the screen.