Dell 7700HD Projector - Manual (Page 65)

Presentation to Go (PtG) Installation
Minimum system requirements to install PtG are as follow:
Operating System:
- Windows
Microsoft Windows XP™ Home or Professional Service pack 2/3 (32-bit
recommended), Windows Vista 32-bit, or Windows ® 7 Home or Professional
32-bit or 64-bit
- Office 2003 or Office 2007
In order to use your USB Viewer, you need to complete the steps below:
"Wireless and LAN" option and "Wireless connection" default are enabled.
1 Plug the USB Flash drive to your projector.
NOTE:
• Supports only the JPEG format photo within 10 MB x 40 M pixels.
• The PtG converter can convert your PowerPoint files into PtG files. See
"Install the PtG Converter Application Software on Your Computer" on
page 69.
• You can download the "PtG Converter - Lite" from the Dell Support site at
support.dell.com.
2 At INPUT SOURCE menu, select Wireless/USB and then select USB Viewer
on the sub-menu. See "INPUT SOURCE WIRELESS/USB" on page 38.
NOTE:
1 When the Wireless and LAN function is disabled , Go to LAN Settings menu,
select the "Enabled" in the "Wireless and LAN" option to activate the Wireless
and LAN function.
2 When the Wireless connection is disconnected, Go to Wireless Settings
menu, select the "Connected" in the Wireless option to enable wireless
connection.
Using Your Projector 65