Uefi boot manager – Dell PowerEdge M710 User Manual

Page 7

Advertising
background image

 

Page 5 

 

UEFI Boot Manager 

The UEFI Boot Manager is entered by pressing <F11> during the pre‐boot phase of system startup.  In UEFI boot 
mode, it replaces both the BIOS Boot Manager and the boot configuration options in the BIOS Setup Utility <F2>.  
When the Boot Mode is set to UEFI the BIOS Setup Utility fields, Boot Sequence and USB Flash Drive Emulation 
Type
 are grayed out, replaced by enhanced options in the UEFI Boot Manager. 

Boot Options 
The front page of the UEFI Boot Manager lists boot options in order of boot priority.  Selection of any of these 
options results in an attempt to boot.  If the option is not bootable (for example, no media in an optical drive), an 
error message displays along with a prompt to enter the UEFI Boot Manager or the BIOS Setup Utility. 

In cases where a boot option has been added manually or by an operating system installation and that option is no 
longer valid (for example, a hard‐disk drive has been removed), the option will continue to be listed, but will be 
grayed out and display “Unavailable.”  Boot Option entries for removable devices are automatically added and 
removed based in insertion and removal of the device.

UEFI Boot Settings 
The UEFI Boot Settings menu can be entered from the front page.  The following options are available from this 
menu: 

Option 

Description

Add Boot Option 

Provides a menu from which to select a boot option.  

• For mass storage devices with a FAT32 file system, a menu displays to 

navigate to a file to select as the boot option.   

• For PXE‐capable devices, the device itself can be selected.   
 

When adding a new boot option, the Description and Optional Data can be 
entered.  The Description identifies the device in the UEFI Boot Manager; the 
Optional Data is passed to the boot image, per the UEFI specification. 

Delete Boot Option 

Provides a menu of boot options that were manually and operating system 
installed and can be deleted.  Boot options that were automatically added are 
not listed. 

Enable/Disable Boot Option 

Provides a menu of boot options that can be disabled which removes  them from 
the boot option list.  Disabled devices can be re‐enabled from this menu. 

Change Boot Order 

Allows the boot priority of the boot options to be modified. 

One‐Time Boot From File 

Provides a menu similar to that of Add Boot Option, but does not add the boot 
option.  Instead, it attempts to boot to the selected file or device. 

System Utilities 
The System Utilities menu can be entered from the front page.  The following options are available from this 
menu: 

Option 

Description

System Setup 

Enters the System Setup Utility.  This can also be entered by pressing <F2> during 
the pre‐boot phase of system startup. 

System Services 

Enters System Services.   This can also be entered by pressing <F10> during the 
pre‐boot phase of system startup. 

BIOS Boot Manager 

Enters the BIOS Boot Manager to provide the ability to boot to a non‐UEFI aware 
operating system while the Boot Mode is set to UEFI.  This is the same Boot 
Manager that would be entered by pressing <F11> during the pre‐boot phase of 
system startup if the Boot Mode is set to BIOS

Reboot System 

Reboots system.

Advertising