Dell Vostro 330 (Early 2011) - Manual (Page 110)

Back to Contents Page
Dell Vostro 330 Owner's Manual
Installing The Front Bezel
1. Place the front bezel on the chassis.
2. Carefully route in the IR cable and camera cable out through the routing slot.
3. Carefully route the Bluetooth cable out through the routing slot.
4. Press the bezel till it snaps into the chassis.
5. Hold the assembly together and carefully turn it over.
6. Replace the screws that secure the front bezel to the chassis. The screws are marked with an arrow.
7. Thread the IR cable and camera cable.
8. Route the bluetooth cable through the routing slot on the chassis.
9. Replace the processor
10. Replace the processor heat sink .
11. Replace the processor fan .
12. Replace the video card fan .
13. Replace the video card and heat sink assembly .
14. Replace the system board shield .
15. Replace the front stand .
16. Replace the cover .
17. Follow the procedures in After Working Inside Your Computer .
Related tasks
Removing the Front Bezel