Dell S520 Projector - Manual (Page 5)

OSD Transparancy
Write
0xefbe 0x10 0x0006 0x5adc 0x1111 0x0002 0x66 0x00~0x0f Range (0x00~0x0f)
OSD Transparancy
Read
0xefbe 0x10 0x0005 0x7fec 0x1111 0x0001 0x67 Range (0x00~0x0f)
Volume Write 0xefbe 0x10 0x0006 0xdb18 0x1111 0x0002 0x68 0x00~0x14 Range (0x00~0x14)
Source-VGA
Analog-B
0xefbe 0x10 0x0005 0xfe28 0x1111 0x0001 0x69
Temp Alert 0xefbe 0x10 0x0005 0xbe29 0x1111 0x0001 0x6a
0x00: Normal
0x01: Abnormal
Exit Lockup 0xefbe 0x10 0x0005 0xffeb 0x1111 0x0001 0x6d
Closed Captions 0xefbe 0x10 0x0006 0x7e2a 0x1111 0x0002 0x6f 0x00~0x04
0x00: Off
0x01: CC1
0x02: CC2
0x03: CC3
0x04: CC4
Lamp Mode
Dynamic
0xefbe 0x10 0x0005 0x3fe2 0x1111 0x0001 0x70
Lamp Mode
Extreme Dimming
0xefbe 0x10 0x0005 0xfe22 0x1111 0x0001 0x71
Power Saving 0xefbe 0x10 0x0006 0xfe66 0x1111 0x0002 0x81 0x00~0x78
0x00, 0x05, 0x0a, 0x0f,
0x14, 0x19, 0x1e, 0x23,
0x28, 0x2d, 0x32, 0x37,
0x3c, 0x41, 0x46, 0x4b,
0x50, 0x55, 0x5a, 0x5f,
0x64, 0x69, 0x6e, 0x73,
0x78
Quick Shutdown 0xefbe 0x10 0x0006 0xbe67 0x1111 0x0002 0x82 0x00~0x01
0x00: No
0x01: Yes
Lamp-Mode Read 0xefbe 0x10 0x0005 0x7fa7 0x1111 0x0001 0x83
0x00: Eco
0x01: Normal
0x02: Dynamic
0x03: Extreme Dimming
Operating Hours 0xefbe 0x10 0x0005 0x3e65 0x1111 0x0001 0x84 Hours (2 byte)
Password Off 0xefbe 0x10 0x0005 0xffa5 0x1111 0x0001 0x85
Password Delete 0xefbe 0x10 0x0005 0xbfa4 0x1111 0x0001 0x86
Zoom Status 0xefbe 0x10 0x0005 0xffa0 0x1111 0x0001 0x89 Range (0x01~0x0a)
Power Saving Status 0xefbe 0x10 0x0005 0xbfa1 0x1111 0x0001 0x8a
0x00, 0x05, 0x0a, 0x0f,
0x14, 0x19, 0x1e, 0x23,
0x28, 0x2d, 0x32, 0x37,
0x3c, 0x41, 0x46, 0x4b,
0x50, 0x55, 0x5a, 0x5f,
0x64, 0x69, 0x6e, 0x73,
0x78
Source-Wireless
Display
0xefbe 0x10 0x0005 0x7e61 0x1111 0x0001 0x8b
Wireless Off 0xefbe 0x10 0x0005 0x3fa3 0x1111 0x0001 0x8c
Wireless On 0xefbe 0x10 0x0005 0xfe63 0x1111 0x0001 0x8d
Source-USB Display 0xefbe 0x10 0x0005 0xbe62 0x1111 0x0001 0x8e
Source-USB Viewer 0xefbe 0x10 0x0005 0x7fa2 0x1111 0x0001 0x8f
Source- Intel®
WiDi
0xefbe 0x10 0x0005 0x3fac 0x1111 0x0001 0x98
Source-Internal
Memory
0xefbe 0x10 0x0005 0xfe6c 0x1111 0x0001 0x99
System Status 0xefbe 0x10 0x0005 0x7e46 0x1111 0x0001 0xff
0x01: Standby
0x02: Warm Up
0x03: Power On
0x04: Cooling
0x05: Power Saving
Note 2: After power on the projector, wait for 5 seconds before sending next command.
Note 3: The range will depend on VGA input resolution.
Note 4: If sending multiple commands, check that a response has been received from the projector
before sending next command.
Information in this document is subject to change without notice.
© 2013 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly
forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks
and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its
own.
September 2013 Rev. A00