Dell PowerEdge SC 430 - Manual (Page 2)

Back to Contents Page
Technical Specifications
Dell™ PowerEdge™ SC430 Systems User's Guide
Processor
Processor type Intel® Pentium® D processor with a minimum clock
speed of at least 3.0 GHz
or
Intel Pentium 4 processor with a minimum clock
speed of at least 2.8 GHz
or
Intel Celeron® D processor with a minimum clock
speed of at least 2.53 GHz
Internal cache At least 2x1 MB (Intel Pentium D processor), 1 MB
(Intel Pentium 4 processor) and 256 KB (Intel Celeron
processor)
Front-side bus speed Up to 800 MHz (Intel Pentium D and Intel Pentium 4
processors) and 533 MHz (Intel Celeron D processor)
Expansion Bus
Bus type PCI and PCIe
Expansion slots
PCIe 2.5-Gb/sec PCIe x1, 3.3-V, 12-V (slot 1)
2.5-Gb/sec PCIe x8, 3.3-V, 12-V (slot 2)
2.5-Gb/sec PCIe x4, 3.3-V, 12-V (slot 4)
PCI Two 5-V, half-length, 32-bit, 33-MHz (slots 3 and 5)
Memory
Architecture 72-bit, ECC, PC-4300, Unbuffered, DDR II SDRAM,
DIMMs, rated for 533-MHz operation
Memory module sockets Four 240-pin
Memory module capacities 256 MB, 512 MB, or 1 GB
Minimum RAM 256 MB (one 256-MB module)
Maximum RAM 4 GB
Drives
Hard drives
SATA
SCSI
Up to two non–hot-plug, 1-inch, internal SATA hard
drives with the integrated SATA controller
or
Up to two non–hot-plug, 1-inch, internal SCSI drives
with a SCSI controller card
Diskette drive One optional 3.5-inch, 1.44-MB
CD drive One optional IDE CD, DVD, or CD-RW/DVD
combination
NOTE: DVD devices are data only.
Tape drive One optional 5.25-inch SCSI or IDE tape device
Connectors
Externally accessible