Installing the heat sink and processor assembly – Dell Vostro 460 (Late 2010) User Manual
Page 44
Advertising
Installing The Heat Sink And Processor Assembly
1. Remove the processor from the antistatic packaging and place it into the socket.
2. Place the processor cover.
3. Push the release lever down and then press it inward to hold the retention hook that secures it.
4. Place the heat sink/fan assembly into the computer.
5. Tighten the four captive screws securing the heat sink/fan assembly to the system board.
6. Reconnect the heat sink/fan assembly cable from the system board.
7. Replace the
.
8. Follow the procedures in
After Working Inside Your Computer
Related tasks
Advertising