Dell PowerEdge VRTX - Manual (Page 26)

26 Using the CLI
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Plasma\GSG\Plasma_UGUsing_CLI.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 3 / 6 /1 3 - FO R P R O O F O N LY
4 When the new image is downloaded, it is saved in the area allocated for
the other copy of the system image (image-2, as shown in the example).
The following is an example of the information that appears:
Exclamation symbols indicate that a copying process is in progress. Each
symbol (!) corresponds to 512 bytes transferred successfully. A period
indicates that the copying process is timed out. Many periods in a row
indicate that the copying process failed.
5 Select the image for the next boot by entering the boot system command.
After this command, enter the show bootvar command to verify that the
copy indicated as a parameter in the boot system command is selected for
the next boot.
The following is an example of the information that appears:
If the image for the next boot is not selected by entering the boot system
command, the system boots from the currently active image.
6 Enter the reload command. The following message is displayed:
7 Enter Y. The device reboots.
Boot Image Download
Loading a new boot image from the TFTP server, updates the boot image.
The boot image is loaded when the device is powered on. A user has no
control over the boot image copies.
console# copy tftp://176.215.31.3/r2401-100048.ros image
Accessing file ‘r2401-100048’ on 176.215.31.3Ö
Loading r2401-100048 from 176.215.31.3:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Copy took 00:01:11 [hh:mm:ss]
console# boot system image-2
console# show bootvar
Images currently available on the Flash
Image-1 active
Image-2 not active (selected for next boot)
console# reload
This command will reset the whole system and disconnect your current
session. Do you want to continue (y/n) [n]?