Latitude on™ card, Removing the latitude on card – Dell Latitude E4200 (Late 2008) User Manual
Page 30
Back to Contents Page
Latitude ON™ Card
Dell™ Latitude™ E4200 Service Manual
Replacing the Latitude ON Card
Removing the Latitude ON Card
1.
Follow the procedures in
Before Working on Your Computer
.
2.
Remove the service panel (see
Removing the Service Panel
).
3.
Disconnect the antenna cables from the card.
4.
Remove the M2 x 3-mm screw.
5.
Pull the card up to disconnect it from the system board connector.
CAUTION:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.
NOTE:
The Latitude ON™ card is optional and may not be present in some computers.
1
antenna cables (2)
2
Latitude ON card
3
screw
1
Latitude ON card
2
system board connector