Dell PowerEdge 1850 User Manual
Page 4
4
Upgrading Your System Board and Riser Board
www
.dell.com | support.dell.com
Figure 1-1.
Installing and Removing the Riser Board
9
Remove the memory modules. See "System Memory" in "Installing System Options" in your
Installation and Troubleshooting Guide.
NOTE:
While removing the memory modules, record the memory module socket locations to ensure
proper installation.
10
If applicable, remove the RAC card. See "Installing a RAC Card" in "Installing System
Options" in your Installation and Troubleshooting Guide.
11
If applicable, remove the RAID key.
12
Remove the power supply(s). See "Power Supplies" in "Installing System Options" in your
Installation and Troubleshooting Guide.
13
Remove the processor(s). See "Processor" in "Installing System Options" in your Installation
and Troubleshooting Guide.
plastic rivet
riser board
SCSI data connector
riser board insulator
riser board cam lever
plastic rivet
D8781bk0.book Page 4 Wednesday, June 17, 2009 10:41 AM