Dell IN2020M Monitor - Manual (Page 11)

Dell IN2020/IN2020M Flat Panel Monitor User's Guide
file:///C|/Users/santhosh_v/Desktop/UG_en/about.htm[3/27/2013 12:20:59 PM]
(kHz) (MHz)
VGA, 720 x 400 31.469 70.087 28.3 -/+
VGA, 640 x 480 31.469 59.940 25.2 -/-
VGA, 640 x 480 37.500 75.000 31.5 -/-
VESA, 800 x 600 37.879 60.317 40.0 +/+
VESA, 800 x 600 46.875 75.000 49.5 +/+
VESA, 1024 x 768 48.363 60.004 65.0 -/-
VESA, 1024 x 768 60.023 75.029 78.8 +/+
VESA. 1152 x 864 67.500 75.000 108.0 +/+
VESA, 1280 x 1024 64.000 60.000 108.0 +/+
VESA, 1280 x 1024 79.976 75.025 135.0 +/+
VESA, 1600 x 900 55.540 60.000 97.75 +/-
Electrical
Model IN2020/IN2020M
Video input signals
Analog RGB, 0.7 Volts +/- 5%, positive polarity at 75 ohm input impedance
Digital DVI-D TMDS, 600mV for each differential line, positive polarity at 50 ohm input
impedance (for IN2020M)
Synchronization input signals
Separate horizontal and vertical synchronizations, polarity-free TTL level, SOG
(Composite SYNC on green)
AC input voltage/frequency/current 100 to 240 VAC/50 or 60 Hz + 3 Hz/1.6A (Max.)
Inrush iso surge current
120 V: 30 A (Max.)
240 V: 60 A (Max.)
Physical Characteristics
Model IN2020/IN2020M
Connector type
D-sub: Blue connector
DVI-D: White connector (for IN2020M only)
D-sub: Detachable, Analog, 15 pin, shipped attached to the monitor