Installing the system fan, Removing the thermal sensor – Dell OptiPlex XE2 (Mid 2013) User Manual
Page 24
Advertising
4.
Pry and remove the system fan away from the four grommets securing it to the back of the computer.
Installing the System Fan
1.
Place the system fan in the chassis.
2.
Pass the four grommets through the chassis and slide outward along the groove to secure in place.
3.
Connect the system-fan cable to the system board.
4.
Install the cover.
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Thermal Sensor
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the cover.
24
Advertising