Display assembly, Removing the display assembly – Dell Vostro 1720 (Early 2009) User Manual
Page 29
Advertising
Back to Contents Page
Display Assembly
Dell™ Vostro™ 1720 Service Manual
Removing the Display Assembly
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
battery
from the computer.
3.
Remove the
hinge cover
from the computer.
4.
Remove the
keyboard
from the computer.
5.
Disconnect the antenna cables from the WLAN card.
6.
Remove the three screws that secure the display assembly to the computer chassis.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Advertising