Dell Inspiron 4150 - Manual (Page 35)

Setting Up and Using Your Computer 35
HINT: If you do not know
which type of connection
to select, contact your
ISP.
9 Click the appropriate option under How do you want to connect to
the Internet?, and then click Next.
10 Use the setup information provided by your ISP to complete the setup.
If you are having problems connecting to the Internet, see "Modem and
Internet Connection Problems" on page 62. If you cannot connect to the
Internet but have successfully connected in the past, the ISP might have a
service outage. Contact your ISP to check the service status, or try
connecting again later.
Copying CDs
HINT: The information in
this section also applies to
using Easy CD Creator
Basic with a DVD+RW or
a DVD+R drive.
To burn CDs, you need to use CD-burner software. Roxio Easy CD Creator
Basic is your computer's CD-burner software. The software includes these
project programs that enable you to record specialty CDs for different types
of uses:
• DirectCD allows you to format a blank CD-R or CD-RW disc so that
you can use Microsoft ® Windows ® Explorer to drag and drop data
files to the CD-RW drive. You can use a DirectCD-formatted CD-RW
disc like another hard drive on your computer because CD-RW discs
are fully rewritable (CD-R discs can be used with DirectCD, but that
media type has overwriting limitations—see "Using Blank CD-R Discs
or Blank CD-RW Discs" for recording media differences).
• MusicCD allows you to burn custom music CDs.
• DataCD allows you to copy a variety of your documents, such as
spreadsheet or accounting files, to a CD for permanent storage.
HINT: Some music and
game CDs are copy-
protected. If you have a
CD that cannot be copied,
you must use the original
CD for everyday use.
• Disc Copier allows you to make a backup copy of almost any type of
CD. This program allows you to make a copy of a CD for everyday use
so that you can archive and save the original copy. (Disc Copier is
titled "CD Copier" in some versions of Roxio CD Creator Basic.)
All four project programs are available on the Easy CD Creator Basic Select
a Project menu screen. To view the Select a Project menu screen, click the
Start button, point to All Programs→ Roxio Easy CD Creator, and then
click Project Selector.