Dell Inspiron 9300 - Manual (Page 96)

96
Adding and Replacing Parts
www
.dell.com | support.dell.com
Display
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
periodically touching an unpainted metal surface (such as a connector on the back of the computer).
NOTICE:
To avoid damaging the system board, you must remove the main battery before you begin
working inside the computer.
1 Follow the procedures in "Before You Begin" on page 81.
2 Loosen the two captive screws and remove the Mini PCI card cover.
3 Disconnect the antennae cables from the Mini PCI card.
4 Remove the hinge cover. See page 93.
5 Remove the four screws securing the display.
6 Disconnect the display cable, using the pull-tab.
antenna
cables