Replacing the usb board – Dell Inspiron M5040 (Mid 2011) User Manual
Page 44
44
USB Board
Replacing the USB Board
1 Follow the procedures in "Before You Begin" on page 9.
2 Slide the connectors on the USB board into the slots on the computer base
and snap the USB board into place.
3 Slide the USB-board cable into the connector on the USB board. Press
down on the connector latch to secure the USB-board cable to the
connector on the USB board.
4 Replace the hard drive. See "Replacing the Hard Drive" on page 39.
5 Follow the instructions from step 3 to step 7 in "Replacing the Palm-Rest
6 Replace the battery. See "Replacing the Battery" on page 14.
CAUTION:
Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
1
USB-board cable
2 USB board
3
tabs (2)
1 2
3