Setting up the monitor, Attaching the stand – Dell S2415H Monitor User Manual
Page 21
Setting Up the Monitor |
21
Setting Up the Monitor
Attaching the Stand
NOTE: The stand riser and stand base are detached when the monitor is shipped
from the factory.
NOTE: The procedure below is applicable for the default stand. If you purchased
any other stand, see the documentation shipped with the stand to set it up.
WARNING: Place monitor of a flat, clean, and soft surface to avoid scratching the
display panel.
1
Assemble the stand riser to stand base.
a
Attach the stand riser to the stand base.
b
Tighten the thumbscrew below the stand base.
2
Attach the stand assembly to the monitor.
a
Remove the cover and place the monitor on it.
b
Insert the two tabs on the upper part of the stand in the slots on the back of the
monitor.
c
Press the stand down till it snaps into place.