Dell Dimension 4500S - Manual (Page 31)

10. Access the system setup program and restore the settings you recorded in step 1 .
Closing the Computer Cover
1. Ensure that all cables are connected, and fold cables out of the way. Do not route cables over the drive cage—they can prevent the cover from closing
properly.
2. Ensure that no tools or extra parts are left inside the computer.
3. Pivot the cover down and ensure that the release buttons click into place.
4. Attach the computer stand (optional).
5. Connect your computer and devices to electrical outlets, and turn them on.
Back to Contents Page
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.