Display assembly, Removing the display assembly – Dell Vostro 3500 (Early 2010) User Manual
Page 19
Back to Contents Page
Display Assembly
Dell™ Vostro™ 3500 Service Manual
Removing the Display Assembly
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
battery
.
3.
Remove the
base cover
.
4.
Remove the
hard drive
.
5.
Remove the
optical drive
.
6.
Remove the
wireless local area network (WLAN) card
.
7.
Remove the
wireless wide area network (WWAN) card
.
8.
Remove the
keyboard
.
9.
Remove the
palm rest
.
10.
Flip the computer over and release the antenna cables from their routing guides on the computer.
11.
With the right side of the computer facing up, disconnect the display cable from the system board.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.