Before you begin: dell xps 730/730x service manual, Before you begin, Technical specifications – Dell XPS 730x (Early 2009) User Manual

Page 6: Recommended tools, Turning off your computer, Safety instructions

Advertising
background image

Before You Begin: Dell XPS 730/730X Service Manual

file:///C|/Users/santhosh_v/Desktop/7/SM_en/before_y.htm[9/5/2013 11:46:27 AM]

Back to Contents Page

Before You Begin

Dell™ XPS™ 730/730X Service Manual

Technical Specifications

Recommended Tools

Turning Off Your Computer

Safety Instructions

This chapter provides procedures for removing and installing the components in your computer. Unless otherwise noted, each

procedure assumes that the following conditions exist:

You have performed the steps in

Turning Off Your Computer

and

Safety Instructions

.

You have read the safety information that ships with your computer.

A component can be replaced or—if purchased separately—installed by performing the removal procedure in reverse

order.

Technical Specifications

For information on technical specifications of your computer, see the Quick

Reference Guide that shipped with your computer or see the Dell Support

website at support.dell.com.

Recommended Tools

The procedures in this document may require the following tools:

Small Phillips screwdriver

Small flat-blade screwdriver

Turning Off Your Computer

CAUTION:

To avoid losing data, save and close all open files and exit all open programs before you turn off

your computer.

1. Shut down the operating system:

2. Ensure that the computer and all attached devices are turned off. If your computer and attached devices did not

automatically turn off when you shut down your operating system, press and hold the power button for about 4

seconds to turn them off.

Safety Instructions

Use the following safety guidelines to help protect your computer from potential damage and to help to ensure your own

Advertising