Dell P2314H Monitor - Manual (Page 14)

26  Operating the Monitor Operating the Monitor  27
Wall Mounting (Optional)
(Screw dimension: M4 x 10 mm).
Refer to the instructions that come with the VESA-compatible wall
mounting kit.
1. Place the monitor panel on a soft cloth or cushion on stable flat table.
2. Remove the stand.
3. Use a screwdriver to remove the four screws securing the plastic cover.
4. Attach the mounting bracket from the wall mounting kit to the LCD.
5. Mount the LCD on the wall by following the instructions that came with
the wall mounting kit.
NOTE: For use only with UL Listed Wall Mount Bracket with minimum
weight/load bearing capacity of 3.34 kg.
Operating the Monitor
Power On the Monitor
Press the button to turn on the monitor
Using the Front Panel Controls
Use the control buttons on the front of the monitor to adjust the
characteristics of the image being displayed. As you use these buttons to
adjust the controls, an OSD shows the numeric values of the characteristics
as they change.
The following table describes the front panel buttons: