Dell Studio XPS 1645 (Late 2009) - Manual (Page 21)

3. Route the Mini-Card antenna cables into their routing guides on the palm rest and through the system board.
4. Replace the two screws on the computer base.
5. Route the Mini-Card antenna cables through their routing guides in the computer base.
6. Replace the optical drive (see Replacing the Optical Drive ).
7. Replace the palm rest (see Replacing the Palm Rest ).
Back to Contents Page
NOTICE: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in
damage to the computer.