Setting up the 5.1 audio connections (optional), Setting up the 5.1 audio connections, Optional) – Dell Studio XPS 1645 (Late 2009) User Manual
Page 15
Advertising
13
Setting Up Your Studio XPS Laptop
Setting Up the 5.1 Audio
Connections (Optional)
To set up the 5.1 audio connections:
Click Start
→ Control Panel→ Additional
Options. Run IDT Audio Control Panel. In the
Jacks tab, there are three connector icons.
Follow the instructions to finish the setup.
Click the microphone icon, select
1.
Device:
Rear Speakers, and plug your rear speaker
cable to the audio in/microphone connector.
Click the middle headphone icon, select
2.
Device: Center/LFE Speaker, and plug your
center/woofer speaker cable to the middle
audio out/headphone connector.
Click the right headphone icon, select
3.
Device: Front Speaker, and plug your
front speaker cable to the right audio out/
headphone connector.
Advertising