Dell Inspiron 1300 - Manual (Page 37)

Back to Contents Page
Microprocessor Thermal-Cooling Assembly
Dell™ Inspiron™ 1300/B120/B130 Service Manual
Removing the Microprocessor Thermal-Cooling Assembly
Installing the Microprocessor Thermal-Cooling Assembly
Removing the Microprocessor Thermal-Cooling Assembly
1. Follow the instructions in Before Working Inside Your Computer .
2. Turn over the computer.
3. Loosen the captive screw in the thermal-cooling/microprocessor cover and remove the cover.
4. Loosen in consecutive order the four captive screws, labeled "1" through "4," in the thermal- cooling assembly.
5. Lift the thermal-cooling assembly out of the computer by pulling straight up on the pull-strap.
CAUTION: Before performing the following procedures, read the safety instructions in the Product Information Guide.
CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of
your computer's electronic components. You can do so by touching an unpainted metal surface.
1 thermal-cooling assembly pull-strap 2 captive screws (4)