Dell Latitude C500 - Manual (Page 46)

46 Removing and Replacing Parts
w
w
w
.d
e
ll
.co
m
|
s
u
p
p
o
rt
.d
e
ll.c
o
m
Removing the Hybrid Cooling Fan
1 Remove the hard drive.
2 Remove the keyboard assembly.
3 Remove the display assembly.
4 Remove the palmrest assembly.
5 Remove the thermal cooling assembly.
6 Remove the two M2.5 x 5-mm screws and one M2 x 3-mm screw that
secure the hybrid cooling fan to the system board.
7 Disconnect the fan power cable from the system board interface
connector and remove the hybrid cooling fan.
NOTE: The fan power cable is long, and can be pulled out from under the
EMI shield to provide access to the connector.
NOTICE: Do not block the keyboard screw hole when reinserting the fan
cable.