Installing the heatsink, Removing the memory – Dell Inspiron 14 (5439, Late 2013) User Manual
Page 22
Advertising
Installing the Heatsink
1.
Place the heatsink into its original position on the system board.
2. Tighten the screws to secure the heatsink to the system board.
3. Install:
a) system fan
b) battery
c) base cover
4. Follow the procedures in
After Working Inside Your Computer.
Removing the Memory
1.
Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a) base cover
b) battery
3. Pry the securing clips away from the memory module until it pops up. Remove the memory module
from its connector on the system board.
22
Advertising