Setting up the monitor, Attaching the stand, Connecting your monitor – Dell IN1720 Monitor User Manual
Page 25: Connecting the blue vga cable
Back to Contents Page
Setting Up the Monitor
Dell™
IN1720/IN1920 Flat Panel Monitor User's Guide
Attaching the Dell Soundbar (Optional)
Removing the Stand for VESA wall mount
Attaching the Stand
Connecting Your Monitor
To connect your monitor to the computer:
1.
Turn off your computer and disconnect the power cable.
2.
Connect the blue display connector cable to the corresponding video port on the back of your computer.
Connecting the Blue VGA Cable
NOTE:
The stand base is detached when the monitor is shipped from the factory.
To attach the monitor stand body to the stand base:
1. Place the monitor stand base on a stable table top.
2. Slide the monitor stand body in the correct direction down onto the stand base until it clicks into place.
CAUTION:
Before you begin any of the procedures in this section, follow the
Safety Instructions
.