Dell E2310HWFP Monitor - Manual (Page 26)

Attaching the Dell Soundbar(Optional)
To attach the Soundbar:
Removing the Stand
To remove the stand:
1. Press and hold the stand release button.
2. Lift the stand up and away from the monitor .
CAUTION: The Graphics are used for the purpose of illustration only. Appearance of the computer may vary.
NOTICE: Do not use with any device other than the Dell Soundbar.
1. Working from the rear of the monitor, attach Soundbar by aligning the two slots with the two tabs along the bottom of the monitor.
2. Slide the Soundbar to the left until it snaps into place.
3. Connect the Soundbar with the DC power connector from the Soundbar Power Adaptor.
4. Insert the mini stereo plug from the back of the Soundbar into the computer's audio output jack.
NOTE: To prevent scratches on the LCD screen place the monitor on a soft cloth or cushion.