Dell XPS M2010 (MXP061, Mid 2006) - Manual (Page 51)

l To select an object, lightly tap once on the surface of the touch pad or use your thumb to press the left touch-pad button.
l To select and move (or drag) an object, position the cursor on the object and tap twice on the touch pad. On the second tap, leave your finger on the
touch pad and move the selected object by sliding your finger over the surface.
l To double-click an object, position the cursor on the object and tap twice on the touch pad or use your thumb to press the left touch-pad button twice.
l The touch pad has scrolling capability in the scroll zone on the right side of the touch pad. Scrolling is enabled by default. To disable this feature, modify
the mouse properties through the Control Panel.
Customizing the Touch Pad and Mouse
You can use the Mouse Properties window to adjust settings for both the mouse and touch pad.
1. Open the Control Panel, click Printers and Other Hardware, and then click Mouse.
2. In the Mouse Properties window, clicking the adjustment settings for the mouse will also adjust the touch pad settings.
3. Click OK to save the settings and close the window.
Keyboard Battery
The wireless keyboard is powered by a rechargeable lithium ion battery. The keyboard battery will recharge when the keyboard is affixed to the computer
base and the base is running on AC power. The keyboard battery does not charge when it is detached from the computer base, even if the computer is
running on AC power.
The keyboard battery indicator light on the keyboard will glow blue when the keyboard is attached to the computer base and drawing power from the
computer only when the computer is connected to AC power. When the keyboard is detached from the computer base, the indicator does not light unless the
rechargeable keyboard battery has less than 15% charge remaining. In this case, the indicator will light orange to alert you to the low battery, and you should
attach the keyboard to the base to allow the keyboard battery to recharge. If the keyboard battery fails, the keyboard power indicator will flash orange.
Dell QuickSet Battery Meter
If Dell QuickSet is installed, press <Fn><F3> to display the QuickSet Battery Meter window. The Battery Status tab displays the charge status for the battery
in your keyboard, as well as the primary computer battery.
For more information about QuickSet, right-click the icon in the taskbar, and click Help.
Replacing the Keyboard Battery
To remove the keyboard battery:
1. Turn the keyboard over.
2. Remove the captive screw at the top of the keyboard battery.
3. Slide the battery forward and out of the keyboard.
NOTE: The scroll zones may not work with all application programs. For the scroll zones to function properly, the application program must be able to
use the touch-pad scroll feature.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.