Dell Studio XPS 435T / 9000 (Early 2009) - Manual (Page 9)

Back to Contents Page
Replacing the Computer Cover
Dell Studio XPS™ 435T/9000 Service Manual
1. Follow the procedures in Before You Begin .
2. Lay the computer on its side with the computer cover facing up.
3. Open the padlock, if applicable.
4. Remove the two thumb screws securing the computer cover.
5. Slide the cover towards the back of the computer, and lift the computer cover away from the computer.
6. Set the computer cover aside in a secure location.
7. To replace the computer cover, perform the removal procedure in reverse order.
Back to Contents Page
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING: To guard against likelihood of electric shock, laceration by moving fan blades or other unexpected injuries, always unplug your
computer from the electrical outlet before removing the cover.
CAUTION: Ensure that sufficient space exists to support the computer with the cover removed—at least 30 cm (1 ft.) of desk top space.
1 thumb screws (2) 2 computer cover
3 front of the computer