Replacing the thermal-cooling assembly, Replacing the – Dell Inspiron 15R (N5110, Early 2011) User Manual
Page 76
Advertising
76
Thermal-Cooling Assembly
Replacing the Thermal-Cooling Assembly
1 Follow the instructions in "Before You Begin" on page 9.
2 Align the screw holes on the thermal-cooling assembly with the screw
holes on the system board.
3 Tighten the five screws that secure the thermal-cooling assembly to the
system board.
4 Connect the fan cable to the connector on the system board.
5 Adhere the tape that secures the fan cable to the system board
6 Follow the instructions from step 4 to step 13 in "Replacing the System
7 Replace the battery (see "Replacing the Battery" on page 16).
1
captive screws (5)
2
system board
3
thermal-cooling assembly
4
fan cable
1
2
3
4
Advertising