Dell IN2020 Monitor - Manual (Page 8)

Preset Display Modes
IN2020/IN2020M
Electrical
Physical Characteristics
Display Mode Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity (Horizontal/Vertical)
VGA, 720 x 400 31.469 70.087 28.3 -/+
VGA, 640 x 480 31.469 59.940 25.2 -/-
VGA, 640 x 480 37.500 75.000 31.5 -/-
VESA, 800 x 600 37.879 60.317 40.0 +/+
VESA, 800 x 600 46.875 75.000 49.5 +/+
VESA, 1024 x 768 48.363 60.004 65.0 -/-
VESA, 1024 x 768 60.023 75.029 78.8 +/+
VESA. 1152 x 864 67.500 75.000 108.0 +/+
VESA, 1280 x 1024 64.000 60.000 108.0 +/+
VESA, 1280 x 1024 79.976 75.025 135.0 +/+
VESA, 1600 x 900 55.540 60.000 97.75 +/-
Model IN2020/IN2020M
Video input signals
Analog RGB, 0.7 Volts +/- 5%, positive polarity at 75 ohm input impedance
Digital DVI-D TMDS, 600mV for each differential line, positive polarity at 50 ohm input
impedance (for IN2020M)
Synchronization input signals
Separate horizontal and vertical synchronizations, polarity-free TTL level, SOG
(Composite SYNC on green)
AC input voltage/frequency/current 100 to 240 VAC/50 or 60 Hz + 3 Hz/1.6A (Max.)
Inrush iso surge current
120 V: 30 A (Max.)
240 V: 60 A (Max.)
Model IN2020/IN2020M
Connector type
l D-sub: Blue connector
l DVI-D: White connector (for IN2020M only)
Signal cable type
l D-sub: Detachable, Analog, 15 pin, shipped attached to the monitor
l DVI-D: Detachable, DVI-D, Solid pins (optional)
Dimensions (with stand)
Height 363 mm (14.30 inches)
Width 481 mm (18.95 inches)
Depth
152 mm (5.98 inches)
Dimensions (without stand)
Height 288.00 mm (11.34 inches)
Width 481 mm (18.95 inches)
Depth 61 mm (2.38 inches)
Stand dimensions