Dell Inspiron 600m - Manual (Page 14)

Display Latch
1. Remove the keyboard .
2. Remove the display assembly .
3. Remove the display bezel .
4. Remove the three M2.5 x 4-mm screws that secure the display latch bracket to the top cover.
5. Lift the display bracket out of the top cover, and then remove the display latch.
Back to Contents Page
NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTE: Ensure that the display bracket is upright when you replace the display latch.
1 top cover
2 M2 x 5-mm screws (3)
3 display bracket
4 display latch