Dell XPS 625 (Early 2009) - Manual (Page 38)

System Date Displays the system date.
System Time Displays the system time.
System Info Displays the system model name.
BIOS Info Display the BIOS revision.
Service Tag Displays the system service tag.
Asset Tag Displays the asset tag.
Memory Installed Displays the total memory size.
Memory Technology Displays the type of memory used in the system.
Processor Type Displays the type of processor.
Processor Speed Displays the speed of the processor.
Processor L2 cache Displays the processor L2 cache size.
Advanced
CPU Feature Allows you to enable or disable the CPU features that
enhance the performance of the system.
Integrated Devices Allows you to enable or disable the integrated
devices and ports on your system.
IDE/SATA Configuration Enables or disables a user to define or change any
values related to IDE or SATA devices such as hard
drives, optical drives, and so on connected to the
computer.
Over Clock Configuration This option enables you to set the system clock
mode.
Over Voltage Configuration This option enables you to configure the voltage of
the CPU core, FSB, memory voltage, and chipset
voltage.
Overclocked DIMM Configuration Allows you to enable or disable overclocked DIMM
support on your system.
Security
Setup Password Allows you to set a Setup password.
System Password Allows you to set a System password.
Power
ACPI Suspend Type Specifies the ACPI suspend type. The default is S3.
AC Recovery Specifies the behaviour of the system after
recovering from a power loss.
¡ On — The computer turns on after it
recovers from a power failure.
¡ Off — The computer remains powered
off.
¡ Last — The computer returns the power
state it was in before the power failure.
Remote Wake Up This option turns on the computer when a user tries
to access the computer through the LAN.
Auto Power On Enables you to set an alarm to turn on the computer
automatically.
Boot
1st Boot Device through 4th Boot Device Sets the boot priority among the attached removable
devices.
Hard Disk Boot Priority Sets the hard drive boot priority. The items displayed
are dynamically updated according to the hard drives
detected.
Exit
Exit Options Provides options to Exit Saving Changes, Exit
Discarding Changes, Load Setup Default, and
Discard Changes.