Lockups and software problems – Dell OptiPlex FX160 (Late 2008) User Manual
Page 19
Troubleshooting Tips
19
•
Reseat the memory modules to ensure that your computer is successfully
communicating with the memory.
•
Run the Dell Diagnostics (see "Dell Diagnostics" on page 21).
I
F
YOU
EXPERIENCE
OTHER
MEMORY
PROBLEMS
—
•
Reseat the memory modules to ensure that your computer is successfully
communicating with the memory.
•
Ensure that you are following the memory installation guidelines.
•
Ensure that the memory you are using is supported by your computer. For
more information about the type of memory supported by your computer,
see "Specifications" on page 11.
•
Run the Dell Diagnostics (see "Dell Diagnostics" on page 21).
Lockups and Software Problems
NOTE:
The procedures in this document were written for the Windows default
view and may not apply if you set your Dell computer to the Windows Classic view.
The computer does not start up
E
NSURE
THAT
THE
POWER
CABLE
IS
FIRMLY
CONNECTED
TO
THE
COMPUTER
AND
TO
THE
ELECTRICAL
OUTLET
A program stops responding
E
ND
THE
PROGRAM
—
1 Press <Ctrl><Shift><Esc> simultaneously to access the Task Manager,
and click the Applications tab.
2 Click to select the program that is no longer responding, and click End
Task.
A program crashes repeatedly
NOTE:
Most software includes installation instructions in its documentation or on a
floppy disk, CD, or DVD.
C
HECK
THE
SOFTWARE
DOCUMENTATION
—
If necessary, uninstall and then
reinstall the program.